THIS SITE IS UNDER CONSTRUCTION
All rights reserved.
German Vril and Thule
Anti-Gravity Engines
THIS IS A DESCRIPTION OR DIAGRAM OF A ENGINE DESIGN BY
SCHUBERGER, SAID TO BE THE MASTER DESIGNER OF THE
ORIGINAL GRAVITY ENGINE IN GERMANY.
ANOTHER SKETCH OF A GRAVITY ENGINE ALSO BARING
SHUBERGER'S NAME AGAIN.  NOTE THAT THESE TOP TWO
DRAWINGS ARE TOTALLY DIFFERENT THEN THE ENGINE
DRAWINGS BELOW.  ODD...
THULE AND VRIL ENGINE DESIGNS SHOWING THEIR SIZE INSIDE
THE HULLS OF THE CRAFT.
THIS IS THE VRIL ENGINE DESIGN, THE FIRST FUNCTIONAL
ENGINE.  NOTE THE 'SCAVANGER' PACKS AND C-SHAPED END
CAPS AROUND THE PERIMETER OF THE GYRO DISC.  IT APPEARS
TO ONLY HAVE ONE, SINGLE GYRO DISC.
THIS IS THE THULE GRAVITY ENGINE DESIGN, SAID TO BE MORE
ADVANCED THEN THE ORIGINAL VIRL ENGINE DESIGN.  THIS
APPEARS TO POSSIBLY HAVE TWO GYRO DISCS, WHICH WOULD
SPIN IN OPPOSITE DIRECTIONS.  FOR SOME REASON, ONE WAS
ALWAYS A DIFFERENT SIZE THEN THE OTHER.  WHICH DIRECTION
DID THEY SPIN AND WHY?
MODERNIZED VRIL DRAWING IN ENGLISH.  i
BELIEVE WE CAN SAFELY ASSUME THE
'GLOCKE' IS A MICROWAVE GENERATOR.  IN
THIS DRAWING, THE GLOCKE IS REFERRED
TO AS A BELL, WHICH IS THE PROPER
GERMAN TO ENGLISH TRANSLATION.  NOTE IN
ALL DRAWINGS, THERE IS A BELL AT THE TOP
OF THE CORE, SMALL OR LARGE.
QUESTIONS ON FUNCTIONALITIES OF THE
THULE ENGINE DESIGN.
MODERNIZED RENDERING OF THE VRIL
ENGINE.  BASICALLY CREATED OVER THE
DRAWING OF THE VRIL DIAGRAM ABOVE.

NOTE THAT THE DESIGN HAD A STARTER
MOTOR WHICH TURNED INTO A DYNAMO
CHARGER AFTER THE MOTOR TOOK OVER.  
THE ASSEMBLY WAS SPUN UP AT WHICH
POINT THE ZERO POINT SYSTEM TOOK OVER
AND COULD THEN POWER THE DYNAMO LIKE
AN GENERATOR.
THIS IS A BACK SIDE VIEW OF THE CUT-AWAY
OF THE VRIL ENGINE DESIGN.  NOTE THAT
THE GYRO IN THIS RENDERING WAS CUT IN
HALF TO SHOW THE INSIDES, ETC.  THE
FRAMEWORK WAS PROBABLY SQUARE OR
CYLINDRICAL (IN THE CENTER).  IT IS
DIFFICULT TO TELL AS DETAILS DO NOT EXIST
ON HOW IT WAS EXACTLY SHAPED AND BUILT.
MODERNIZED DIAGRAM OF THULE ENGINE
DESIGN CREATED IN A 3D DESIGN PROGRAM
AND RENDERED.

SEVERAL ISSUES WERE DISCOVERED THAT
DO NOT MAKE SENSE.  HOW WOULD THE
GYRO'S BE SUPPORTED AROUND THE FRAME,
AS WELL AS MANY OTHER ISSUES.   SEE THE
DRAWING ABOVE SURROUNDED IN BLUE
COLOR.
Modernized renderings of engine designs created by Bill Ortis, Lionheart Creations.  www.lionheartcreations.com
 HOME              MISSION               HISTORIC               CONCEPTS               CONTACT
Miscellaneous Engine
Renderings
THESE ARE A GROUP OF RENDERINGS THAT TRY TO DEPICT THE GERMAN GRAVITY ENGINES (THULE AND VRIL) IN A 3-DIMENSIONAL
STATE.  HOWEVER, PROBLEMS EXIST IN THE BLUEPRINTS FROM GERMANY (DIAGRAMS FOUND) WHERE A FRAME WOULD HAVE ISSUES
BEING AROUND THE CORE SPHERE, THE GYRO BEARING CARRIER (TRACK RING), ETC.  YOU CAN SEE IN THE BOTTOM LEFT VIEW, THE
FRAME SITTING 'IN' THE GYRO ASSEMBLY, WHICH MAKES ME FEEL THE COPYRIGHT DIAGRAMS COULD BE PARTIALLY WRONG, PROBABLY
TO KEEP PEOPLE FROM MAKING IT OUTSIDE OF THE SS TEAM THAT WAS IN CHARGE OF MAKING THESE CRAFT.  WHY PRINT OUT
SOMETHING FOR COPYRIGHT THAT IS HIGHLY TOP SECRET.  SO THEY PROBABLY DEPICT THINGS WRONG HERE AND THERE TO KEEP IT
SAFE.